- 2 x Stainless Steel Delta Rings Lifting Points rated at A4-Grade
- 100cm high HDPE Walls
- 3mm HDPE External Tray
- 6mm HDPE internal Flooring
- 2 x top handles + 2 x side handles - with firm grip
- Double velcro side opening for easy access - with secure straps to strengthen the opening
LBWTOS 900 is tailor made to hoist a coupling cover up a wind turbine, the side opening allows for easy access especially considering the height of this bag. Due to sharp edges on either end of the cover, we have incorporated 3mm HDPE walls at the lower half of the bag and double fabric at the top for protection and durability.
|Safe Working Load (KG)||500|
|Bag Type||Load Rated|
|Closure||Double Velcro Closure|
|Base Protection||External Tray|
|Base Protection||Internal Tray|
All of our lifting bags comply with the requirements of the Provision and Use of Work Equipment Regulations 1998 (PUWER). Our CE models have integrated sling systems which conforms with the standard EN-1492-1. For more information, please contact email@example.com
All materials used are sourced from trusted third party suppliers. Only materials of the highest quality are used in our products.
Fabric – All our bags are made with Super Strong 900 g/m2 PVC coated fabric with two-side lacquered. Often used as truck curtains, retention basins and anti-pollution barriers.
The PVC coating uses Lowick System which help considerably reduce micro-organism penetration into the heart of the coated fabric. In addition, the Cleangard® lacquer greatly increases durability and makes fabric All-weather resistant and easy to maintain.
This fabric has an extreme tensile strength of 400/400 DaN and can operate in -30°c to +70°c environments, perfect for lifting heavy loads in various conditions.
Webbing Sling – Strong Weave Polyester webbing is used for it’s very high strength tenacity, good chemical and abrasion resistance nature, it is also difficult to ignite and burns slowly. In addition, it has excellent UV protection and does not absorb water, giving it high resistance to rot and mildew. It has a breaking strength of up to 4.5 tonnes, along with elongation properties – lengthening up to 25% at breaking point.
D-rings – A4 grade Stainless Steel 50mm D-rings are used as lifting points. With 8mm diameter thickness, these d-rings are extremely strong. It was tested to destruction with a load of 7 tonnes. The D-rings we use in particular has the joint welded together making it almost impossible to see. This helps further improve strength and durability.
HDPE – All of our protective trays or reinforced flooring uses High Density Polyethylene Plastic. It has a high strength-to-density ratio, low friction, outstanding wear resistance, along with corrosion and abrasion resistance properties. HDPE stays strong whilst offering flexibility, reducing the risk of breakage.
Please contact us directly for a detail list of all materials used along with technical files.